Wall ties are made of stainless and lightweight, but at the same time durable material.
Wall ties are used for brickwork, gas concrete, foam concrete, LECA block, cement wood.
We have a wide range of composite wall ties – with sand coating, one and two anchor expansion.
Glassfiber wall ties with sand coating
Glassfiber wall ties are made of fiberglass roving with the addition of a binder based on epoxy resin. Wall ties have a sandy finish all over the area. Standard dimensions – diameter 5 and 6 mm, length from 250 to 550 mm.
Glassfiber wall ties without sand coating
Glassfiber wall ties are made of fiberglass roving with the addition of a binder based on epoxy resin. wall ties don’t have a sandy finish in all areas. Wall ties have periodic winding to all length. Standard dimensions – diameter 4, 5 and 6 mm, length from 250 to 550 mm.
Glassfiber wall ties with one anchor expansion without sand coating
Glassfiber wall ties are made of fiberglass roving with the addition of a binder based on epoxy resin. wall ties don’t have a sandy finish in all areas. Wall ties have one anchor expansion on one side and cutter grinding on the other side. Standard dimensions – diameter 5.5 mm, length from 100 to 550 mm.
Glassfiber wall ties with two anchor expansion with sand coating
Glassfiber wall ties are made of fiberglass roving with the addition of a binder based on epoxy resin. Wall ties have a sandy finish all over the area. Wall ties have two anchor expansion at the ends. Standard dimensions – diameter 5.5 mm, length from 100 to 550 mm.
Advantages: light weight (less load on the foundation), low thermal conductivity (prevents cold bridges), alkali and corrosion resistance, good adhesion to concrete.
Intended use: connection of internal and external walls in private and high-rise construction, production of three-layer blocks.
Recommendations on the choice wall ties length
- Wall ties length for brickwork, mm:
L = 100 + T + D + 100, where:
100 – minimal wall tie anchorage depth in an internal wall mm,
T – insulation thickness, mm,
D – width of ventilated gap (if any), mm,
100 – minimal wall tie anchorage depth in facing layer, mm.
- Wall ties length for in-situ wall, mm:
L = 60 + T + D + 100, where:
60 – minimal wall tie anchorage depth in an internal wall mm,
T – insulation thickness, mm,
D – width of ventilated gap (if any), mm,
100 – minimal wall tie anchorage depth in facing layer, mm.
- Wall ties length for gas concrete, foam concrete, LECA block, cement wood, mm:
L = 100 + T + D + 100, where:
100 – minimal wall tie anchorage depth in an internal wall mm,
T – insulation thickness, mm,
D – width of ventilated gap (if any), mm,
100 – minimal wall tie anchorage depth in facing layer, mm.
- Wall ties length for situ wall, mm:
L = 100 + T + D + 40, where:
100 – minimal wall tie anchorage depth in an internal wall mm,
T – insulation thickness, mm,
D – width of ventilated gap (if any), mm,
40 – minimal wall tie anchorage depth in facing layer, mm.
- The size of consumption of wall ties is calculated using the following formula (in pcs):
N = S * 5.5, where:
S – total area of all walls (excluding window and door openings).
Application glassfiber wall ties:
Glassfiber wall ties are used to securely fasten the load-bearing wall, insulation and cladding layer.
Internal and external walls have different reactions to temperature and humidity fluctuations in the environment. External wall can change it dimensions, unlike internal walls. Wall ties save the integrity of the wall construction.
With the assistance of wall ties the integrity of the wall construction is preserved.
Fiberglass ties are most popular in Russia due to their advantages. Unlike metal, they do not create cold bridges in the wall and are much lighter, and also do not interfere with radio signals. In comparison with basalt-plastic flexible ties, they are cheaper with the same technical characteristics.
FAQ Related to wall ties Answered
What are wall ties?
GFRP wall ties are a reinforcing bar produced from glassfiber roving impregnated with resin matrix with and without sand coating. Wall ties successfully substitutes steel ties to create a ventilated gap, connect insulation to various wall structures.
How to use brick wall ties?
Connection of the bearing brick layer with the facing: wall ties must be used in the joint in the cement mortar.
Why do i need wall ties?
Wall ties are used to connect the load-bearing wall to the cladding wall. With their help, it is easy to attach insulation or create a ventilated gap. Wall ties are not thermally conductive, which makes it possible to exclude the formation of a “cold bridge” when using metal rods.
What do you need to order wall ties?
GFRP wall ties can be cut with a circular saw with cutting wheel, a manual rebar cutter, bolt cutters or grinder.
How to cut wall ties for wall?
GFRP wall ties can be cut with a circular saw with cutting wheel, a manual rebar cutter, bolt cutters or grinder.
What should be the distance between wall ties on a brick wall?
The number of wall ties per 1 sq meter of a blind wall determined by calculation for thermal deformations but not less than 4 pieces. The step of wall ties are determined by calculation. For mineral wool: not less than vertically – 500 mm (slab height), horizontal step – 500 mm. For expanded polystyrene: the maximum vertical step of the ties is equal to the height of the slab, but not more than 1000 mm, the horizontal step is 250 mm.
Will be able wall ties to pierce the insulation?
Yes, wall ties can easily pierce insulation, for this the company has wall ties with sharpening at one end in the range.
Do you need plastic locking pin for wall ties?
Yes, you can buy it from us. Locking pin is required to create a ventilated gap, to limit the insulation layer.
How much are wall ties?
Wall ties are priced based on length, diameter and type.
What is the MOQ?
We supply products of any quantity from 1 pack.