Glass Fiber Chopped Strands

 

Description: Glass fiber chopped strands are a mixture of short lengths obtained by rubbing a filament yarn.

Filament diameters: 17 μm

Cut lengths available in 6, 12, 18, 20, 24, 40, 48, 50, 52, 54 mm

Glass chopped strand can be supplied in:

– PE Bags of 5, 10 and 20 kg.

– Big Bag of 500-600 kg.

MOQ – 1 kg.

Area of application: The main area of ​​fiber is the reinforcement of concrete industrial floors in warehouses, shopping malls, industrial workshops, roads, bridges, loading platforms, hospitals, subway tunnels, parking lots, car washes.  And also the fiber is used for reinforcing street furniture, including by shotcreting.

Glass Fiber Chopped Strands advantages

  • Reduction of concrete deformation;
  • Increase in frost resistance;
  • Abrasion resistance;
  • Plasticity and toughness of concrete;
  • Doesn’t require additional equipment and does not spoil equipment;
  • Improves impact resistance;
  • Provides crack resistance;
  • Doesn’t float or stick out on the surface;
  • Volumetric 3D reinforcement;
  • Works all the time;
  • Not just in the first hours of filling;
  • No magnetic interference;
  • Eco-friendly.

Chopped strand application instructions

Glass Fiber Chopped strand  is used:

  • To create a mixture for plaster and self-leveling floors. For 1 m3, it is necessary to use 1 kg of glassfiber chopped strand with a diameter of 6 and 12 mm, depending on the type of dry construction mixture.
  • To create a floor screed. For 1 m3, it is necessary to use from 0.9 to 1.5 kg of glassfiber chopped strand with a diameter of 12 and 18 mm, depending on the desired strength characteristics.
  • In the reinforcement of industrial floors. For 1 m3, it is necessary to use 1 kg of glassfiber chopped strand with a diameter of 12, 18 or 24 mm, depending on the desired strength characteristics.
  • For the manufacture of reinforced concrete structures. For 1 m3, it is necessary to use from 0.9 kg of glassfiber chopped strand with a diameter of 12 or 18 mm to prevent cracking and increase the strength of the products.
  • For the manufacture of small piece materials and masonry products. For 1 m3, it is necessary to use from 0.9 kg of glassfiber chopped strand with a diameter of 12 or 18 mm depending on the parameters and dimensions of the product and the production technology.
  • For the manufacture of paving slab. For 1 m3, it is necessary to use from 0.6 to 1.5 kg of glassfiber chopped strand with a diameter of 6 or 12 mm depending on the manufacturing technology and the desired strength characteristics.

 

The process of adding fiber to a concrete mixer before pouring the floor. Fiber 18-24 mm is used in the amount of 6 kg per concrete mixer.

Glass fiber chopped strand and rebar with a diameter of 10 mm are used for floor screed in a production building.

Specifications:

Type of glass S-glass
Tensile Strength, MPa 1500-3500
Modulus of Elasticity, GPa 75
Coefficient of Elongation, % 4,5
Fusing point, С° 860
Resistant to corrosion and alkalis resistance
Density, g/см3 2,60

 

Share

This website uses cookies.